1.G-Series servers come with a default primary IP. If additional IPs are purchased, routing must be configured to enable external access. Each IP corresponds to a network interface: the first IP generally corresponds to interface `nic0`, the second IP to `nic1`, and so on.
2. Steps to Configure Routing for a Second IP
Note: Variables in red should be adjusted based on actual values.
Step 1: Find the Default Gateway for `nic1` Interface
Log in to the server and run:
curl http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/1/gateway -H "Metadata-Flavor: Google"
Example output for the default gateway: 10.10.220.1
Step 2: Identify the Interface Name for "nic1"
Run: ip link list
On CentOS, "nic1" typically maps to "eth1", with the altname "ens5".
Step 3: Locate the Internal IP
Assigned to "ens5"
Run: ip addr show ens5
Internal IP range: "10.10.220.2/32"
Step 4: Create a Custom Routing Table for "nic1"
Execute: echo "1 route-nic1" | sudo tee -a /etc/iproute2/rt_tables
Routing tables are usually named `route-nic0`, `route-nic1`, etc., though you may use any name.
tep 5: Add a Default Route in the Custom Table for `nic1` and Set Up Source-Specific Routing
Run:
sudo ip route add default via 10.10.220.1 dev ens5 table route-nic1
sudo ip route add 10.10.220.1 src 10.10.220.2 dev ens5 table route-nic1
"10.10.220.1" is the default gateway, "ens5" is the interface name, "route-nic1" is the routing table name, and "10.10.220.2" is the internal IP.
Step 6: Create Routing Rules to Use the Custom Table for Packets Matching `nic1`'s Primary Internal IP
Run:
sudo ip rule add from 10.10.220.2/32 table route-nic1
sudo ip rule add to 10.10.220.2/32 table route-nic1
Step 7: Flush the Routing Cache
Run: sudo ip route flush cache
Step 8: Persist the Routes and Rules After Reboot
Open or create "/etc/sysconfig/network-scripts/route-ens5" and add:
default via 10.10.220.1 dev ens5 table route-nic1 10.10.220.1 src
10.10.220.2 dev ens5 table route-nic1
Open or create "/etc/sysconfig/network-scripts/rule-ens5" and add:
from 10.10.220.2/32 table route-nic1
to 10.10.220.2/32 table route-nic1
Save the files, then apply the configuration by restarting the network service:
sudo systemctl restart NetworkManager
